BLJJT - 579.60 PLASTIC SEALER

  • MSDS: BLJJT
  • Manufacturer: N P
  • Product Name: 579.60 PLASTIC SEALER
  • National Stock Number: 8030-00-683-9014
Product Identification

Contractor
INMONT CORP
ST LOUIS, MO 63110-2546 US

Cage: 77464

Ingredients

POLYISOBUTYLENE

CAS: 9003-27-4

RTECS: UD1010000

Fraction By Weight: 20-60%


CALCIUM CARBONATE

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 20-60%


TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 10-30%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192


PIGMENTS

CAS: 9003-27-4

RTECS: UD1010000

Fraction By Weight: TRACE


OCTADECANOIC ACID, ALUMINUM SALT

CAS: 637-12-7

RTECS: WI2820000

Fraction By Weight: 1-5%


CELLULOSE (PAPER FIBER)

CAS: 9004-34-6

RTECS: FJ5691460

Fraction By Weight: 1-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9192

Hazards

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:NO SIGNIFICANT SIGNS OF ANY ADVERSE HEALTH
HAZARDS ARE EXPECTED TO OCCUR AS A RESULT OF INHALATION EXPOSURE OR
SKIN CONTACT. EYES AND SKIN CONTACT: LOW HAZARDS.

First Aid

First Aid:EYE CONTACT: TAKE OUT AS WITH ANY OTHER FOREIGN OBJECT. WASH
WITH PLENTY OF WATER FOR AT LEAST 10 MINUTES. IF ANY SYMPTOMS ARE
PRESENT AFTER WASHING, GET MEDICAL ATTENTION.

Accidental Release

Spill Release Procedures:RECOVER SPILLED MATERIAL AND PLACE IN A PROPER
CONTAINER FOR REUSE OR DISPOSAL.

Handling

Handling and Storage Precautions:STORE IN A COOL DRY PLACE. ROTATE
STOCK.
Other Precautions:FOR INDUSTRIAL USE ONLY. DO NOT BREATHE
DECOMPOSITION PRODUCTS.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED. SELF-CONTAINED BREATHING
APPARATUS REQUIRED IF EXPOSURE TO DECOMPOSITION PRODUCTS IS LIKELY.
Ventilation:GENERAL DILUTION VENTILATION--9000 CFM DILUTION AIR.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE WASH AND SAFETY SHOWERS SHOULD BE
NEARBY.
Supplemental Safety and Health

Stability

Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
HYDROCARBONS AND SMOKE.

Disposal

Product ID:579.60 PLASTIC SEALER
MSDS Date:01/01/1987
FSC:8030
NIIN:00-683-9014
MSDS Number: BLJJT

Waste Disposal Methods:WASTE MATERIAL CAN BE DISPOSED OF IN AN APPROVED
LANDFILL OR MAY BE INCINERATED UNDER CONDITIONS WHICH MEET FEDERAL,
STATE & LOCAL ENVIRONMENTAL CONTROL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.